Terminals & Connectors
|
|
|
Molex 51021-0200 - 1.25mm wrie to board connector manufacturers
The most popular connector for NFP motors.
| Manufacture: | Molex |
| Part Number: | 512021-0200 |
| Application: | single, wire to board or wire to wire |
| Circuits(max): | 2 |
| Pitch: | 1.25mm(0.049") |
| Crimp Terminal: | 50058, 50079 |
| Mating wires: | UL1571 28/30/32AWG |
| Mating Parts: | 51047 Crimp Housing, 53047 PCB Header, 53048 PCB Header, 53261 PCB Header, 53398 PCB Header |
| Link: | https://www.molex.com/molex/products/datasheet.jsp?part=active/0510210200_CRIMP_HOUSINGS.xml |
|
|
|
Molex 51021-0300 - 1.25mm wrie to board connector manufacturers
The most popular 3P connector for NFP motors with NTC connection.
| Manufacture: | Molex |
| Part Number: | 512021-0300 |
| Application: | single, wire to board or wire to wire |
| Circuits(max): | 3 |
| Pitch: | 1.25mm(0.049") |
| Crimp Terminal: | 50058, 50079 |
| Mating wires: | UL1571 28/30/32AWG |
| Mating Parts: | 51047 Crimp Housing, 53047 PCB Header, 53048 PCB Header, 53261 PCB Header, 53398 PCB Header |
| Link: | https://www.molex.com/molex/products/datasheet.jsp?part=active/0510210200_CRIMP_HOUSINGS.xml |
|
|
|
JST SHR-02V-S-B - 1.0mm pin header connector manufacturers
It's much smaller connector with pitch 1.0mm for NFP Motors.
| Manufacture: | JST |
| Part Number: | SHR-02V-S-B |
| Application: | Wire to Board Crimp style Connectors |
| Circuits(max): | 2 |
| Pitch: | 1.00mm(0.039") |
| Crimp Terminal: | SSH-003T-P2.0-H |
| Mating wires: | UL1571 28/30/32AWG |
| Mating Parts: | BM02B-SRSS-TB |
| Link: | https://www.jst-mfg.com/product/pdf/eng/eSH.pdf |
|
|
|
JST SHR-03V-S-B - 1.0mm pin header connector manufacturers
It's much smaller 3P connector with pitch 1.0mm for NFP motor and NTC.
| Manufacture: | JST |
| Part Number: | SHR-03V-S-B |
| Application: | Wire to Board Crimp style Connectors |
| Circuits(max): | 3 |
| Pitch: | 1.00mm(0.039") |
| Crimp Terminal: | SSH-003T-P2.0-H |
| Mating wires: | UL1571 28/30/32AWG |
| Mating Parts: | BM03B-SRSS-TB |
| Link: | https://www.jst-mfg.com/product/pdf/eng/eSH.pdf |
|
|
|
JST ACHR-02V-S - 1.20mm wrie to board connector manufacturers
It's the smallest connector for connection PCB and NFP vibration motor in a limited space.
| Manufacture: | JST |
| Part Number: | ACHR-02V-S-B |
| Application: | Wire to Board Crimp style Connectors |
| Circuits(max): | 2 |
| Pitch: | 1.20mm(0.047") |
| Crimp Terminal: | SACH-003G-P0.2, SACH-003G-P0.2B |
| Mating wires: | UL1571 28/30/32AWG |
| Mating Parts: | BM02B-ACHSS-GAN-ETF |
| Link: | https://www.jst-mfg.com/product/pdf/eng/eACH.pdf |
|
|
|
JST ACHR-03V-S - 1.20mm wrie to board connector manufacturers
It's the best connection solution for connection in narrowapplication.
| Manufacture: | JST |
| Part Number: | ACHR-03V-S-B |
| Application: | Wire to Board Crimp style Connectors |
| Circuits(max): | 3 |
| Pitch: | 1.20mm(0.047") |
| Crimp Terminal: | SACH-003G-P0.2, SACH-003G-P0.2B |
| Mating wires: | UL1571 28/30/32AWG |
| Mating Parts: | BM03B-ACHSS-GAN-ETF |
| Link: | https://www.jst-mfg.com/product/pdf/eng/eACH.pdf |
|
|
|
Molex 50-37-5023 (5264-02) - 2.5mm wrie to board connector manufacturers
It's a popular connector with pitch 2.5mm and friction lock for wire to board.
| Manufacture: | Molex |
| Part Number: | 50-37-5023 (5264-02) |
| Application: | Wire to Board, Friction lock Connectors |
| Circuits(max): | 2 |
| Pitch: | 2.5mm(0.098") |
| Crimp Terminal: | 08-70-1039 |
| Mating wires: | UL1571 22/24/26/28AWG |
| Mating Parts: | 5267 vertical shrouded PCB header, 5268 right angle shrouded PCB header |
| Link: | https://www.molex.com/molex/products/datasheet.jsp?part=active/0050375023_CRIMP_HOUSINGS.xml |
|
|
|
Molex 50-37-5033 (5264-02) - 2.5mm wrie to board connector manufacturers
It's a popular connector with pitch 2.5mm and friction lock for wire to board and NTC/thermister.
| Manufacture: | Molex |
| Part Number: | 50-37-5023 (5264-03) |
| Application: | Wire to Board, Friction lock Connectors |
| Circuits(max): | 3 |
| Pitch: | 2.5mm(0.098") |
| Crimp Terminal: | 08-70-1039 |
| Mating wires: | UL1571 22/24/26/28AWG |
| Mating Parts: | 5267 vertical shrouded PCB header, 5268 right angle shrouded PCB header |
| Link: | https://www.molex.com/molex/products/datasheet.jsp?part=active/0050375023_CRIMP_HOUSINGS.xml |
|
|
|
JST PHR-2 - 2.0mm pin header connector manufacturers
The dimple at the center of the contact ensures positive contact and low contact resistance for NFP motors at all times.
| Manufacture: | JST |
| Part Number: | PH-2, PHR-2, PH connector |
| Application: | Wire to Board Crimp style Connectors |
| Circuits(max): | 2 |
| Pitch: | 2.0mm (0.078") |
| Crimp Terminal: | SPH-002T-P0.5S, SPH-002T-P0.5L, SPH-004T-P0.5S |
| Mating wires: | UL1571 24/26/28/30/32AWG |
| Mating Parts: | B2B-PH-K-S, S2B-PH-K-S |
| Link: | https://www.jst-mfg.com/product/pdf/eng/ePH.pdf |
|
|
|
JST PHR-3 - 2.0mm wrie to board connector manufacturers
The dimple at the center of the contact ensures positive contact and low contact resistance for NFP motors at all times.
| Manufacture: | JST |
| Part Number: | PH-3, PHR-3, PH connector |
| Application: | Wire to Board Crimp style Connectors |
| Circuits(max): | 3 |
| Pitch: | 2.0mm (0.078") |
| Crimp Terminal: | SPH-003T-P0.5S, SPH-003T-P0.5L, SPH-004T-P0.5S |
| Mating wires: | UL1571 24/26/28/30/32AWG |
| Mating Parts: | B3B-PH-K-S, S3B-PH-K-S |
| Link: | https://www.jst-mfg.com/product/pdf/eng/ePH.pdf |
|
|
|
JST XHR-2 - 2.5mm wrie to board connector manufacturers
It's a high reliability and versatility for NFP vibrator motors with 2P and clips.
| Manufacture: | JST |
| Part Number: | XH-2, XHP-2, XH connector |
| Application: | Wire to Board Crimp style Connectors |
| Circuits(max): | 2 |
| Pitch: | 2.5mm (0.098") |
| Crimp Terminal: | SXH-001T-P0.6N, SXH-001T-P0.6 |
| Mating wires: | AWG#22 |
| Mating Parts: | B2B-XH-A, B2B-XH-2 |
| Link: | https://www.jst-mfg.com/product/pdf/eng/eXH.pdf |
|
|
|
JST XHR-3 - 2.5mm wrie to board connector manufacturers
It's a high reliability and versatility for NFP vibrating motors with 3P and clips.
| Manufacture: | JST |
| Part Number: | XH-3, XHP-3, XH connector |
| Application: | Wire to Board Crimp style Connectors |
| Circuits(max): | 3 |
| Pitch: | 2.5mm (0.098") |
| Crimp Terminal: | SXH-001T-P0.6N, SXH-001T-P0.6 |
| Mating wires: | AWG#22 |
| Mating Parts: | B2B-XH-A, B2B-XH-2 |
| Link: | https://www.jst-mfg.com/product/pdf/eng/eXH.pdf |
|
|
|
JST SYR-02T/02TY & SYP-02T/02TV-1-2.5mm wrie to board connector manufacturers
It's a better solution of wire to wire connector with higher current and voltage.
| Manufacture: | JST |
| Part Number: | RCY connector, SYR-02T/SYR-02TY, SYP-02T-1/SYP-02TV-1 |
| Application: | Wire to Wire Connector, Crimp style with locking device |
| Circuits(max): | 2 |
| Pitch: | 2.5mm (0.059") |
| Crimp Terminal: | SCZH-002T-P0.5 |
| Mating wires: | UL1571 26/28AWG |
| Mating Parts: | B02B-CZHK-B-1, S02B-CZHK-B-1, BM02B-CZSS-1-TF, SM02B-CZSS-1-TB |
|
|
|
JST ZHR-2 -1.0mm female header connector manufacturers
It's a also populer connector with 1.5mm pitch.
| Manufacture: | JST |
| Part Number: | ZHR-2 |
| Application: | Disconnectable crimp style connectors |
| Circuits(max): | 2 |
| Pitch: | 1.5mm(0.098'') |
| Crimp Terminal: | SZH-002T-P0.5, SZH-003T-P0.5 |
| Mating wires: | UL1571 26/28/30/32/AWG |
| Mating Parts: | B2B-ZR, S2B-ZR, B2B-ZR-3.4, S2B-ZR-3.4 |
| Link: | https://www.jst-mfg.com/product/pdf/eng/eZH.pdf |
|
|
|
JST ZHR-3 - 1.5mm wrie to board connector manufacturers
It's a also populer connector with 1.5mm pitch.
| Manufacture: | JST |
| Part Number: | ZHR-3 |
| Application: | Disconnectable crimp style connectors |
| Circuits(max): | 3 |
| Pitch: | 1.5mm(0.098'') |
| Crimp Terminal: | SZH-002T-P0.5, SZH-003T-P0.5 |
| Mating wires: | UL1571 26/28/30/32/AWG |
| Mating Parts: | B3B-ZR, S3B-ZR, B3B-ZR-3.4, S3B-ZR-3.4 |
| Link: | https://www.jst-mfg.com/product/pdf/eng/eZH.pdf |
|
|
|
Supply us with your cable assembly
As we do not attach connectors at our facilities, you can supply us with a cable that already has your connector mounted. This cable assembly can be supplied to us by the connector manufacturer or by a cable assembly contractor of your choosing. If the motor is a cylindrical motor and the wire passes though its end cap, the wire can not have an outside diameter larger than we are currently is using. We recommend that the wire you use is either UL3302 (REACH & RoHS) or UL1571 (RoHS). The side of the cable that will connect to our motor must be stripped as per our instructions. Contact us for further information.
Add the connectors yourself
When installing your own connectors on our vibration motors please take note of the wire gauge (typically AWG 30 or 32) and make sure it can be used with your connector. For cylindrical motors, we can not supply a larger diameter wire than is currently used as it will not pass through the holes in the rear of the motors plastic end cap. We can supply any of our coin vibration motors without wires thereby enabling you to solder your cable assembly directly to the motors PCB pads.
Keywords: 2.5mm wrie to board connector manufacturers , 0.8mm pin header connector manufacturers , 1.25mm wrie to board connector manufacturers , 0.8mm wrie to board connector manufacturers , 1.0mm pin header connector manufacturers , 2.0mm pin header connector manufacturers , 2.0mm wrie to board connector manufacturers , 1.0mm wrie to board connector manufacturers , 1.0mm female header connector manufacturers .