Referee Paging System RPS2156

“Referee Paging System” which is used all over the world for Football (Soccer) games.  Insert NFP-P0612 to offer vibration alerting.

Sunu Band Sonar Smartwatch

Our LVM-Series linear vibration motors NFP-ELV1411A is used for SUNU BAND– a smartwatch that is enhancing mobility for the visual impaired.

Lief Smart Patch That Fights Stress

The Lief is a discreet biosensing patch that measures your heart and breath. Lief teaches you to control your body’s natural stress response through gentle, safe biofeedback exercises.

AUDO Compression Silicone Sex Toys

Audo specializing in sex product design, mould design and project management, They use NFP vibration motor inside their silicone sex toys for vibrating.

Laser Tag Equipment

Lasertag is a real-time military sports game. They use our encapsulated vibration motor vibrating to simulated a shooting game like real.

Wearable Device Shade

Built-in NFP-C0820 FPC coin vibration motor is widely used for the wearable devices to offer the notification by vibration alerting, such as the Shade

Swiftpoint Z Mouse

The Swiftpoint Z is a best game mouse built in a Force Sensor & Tactile Feedback to unleash a faster, more precise and highly intuitive mouse.

Who we are?

Need-For-Power Motor Co., Ltd, is a micro electric motors (mainly eccentric rotating mass vibration motor) manufacturer in Shenzhen, China and was found in 2002. With over 10 years of experience in unbalanced vibration motors industrial, our team understands the unique require about micro vibration motor of our clientele. From customer system to stocked items, we will meet your demands in the most effective manner.

As a professional micro DC motor supplier, we provide the most suitable intelligent mobile wearable equipment vibration feedback solution for different customers, which has a good reputation in the micro DC  motor industry. Customer praise is the best feedback for NFP-Motor.

What we can offer is linear resonant actuator, coin vibration motor, encapsulated vibration motor, cylindrical vibrators, powerful vibration motors, BLDC vibration motors, SMD/SMT reflow vibrator, phone vibration motors, DC driving motor, stepping motor, drone motor, DC gearmotor, 6mm planetary motor…

What do we produce?


We produce DC electric motors vibration, vibration motors, BLDC motors, dc vibration motor and gear motors for customer electronic devices, provide a full services from designing to producing motors, also include motors packing and shipment.

Learn more about our Need For Power – Motors on

What do our micro motors used for?

CD/BD/DVD, fan, HDD, pump, blower, polygon scanner, wearable computing, LRA, ERM, alerting reminder, adult Products, massage, SMT, automotive. handheld devices, vibration alerting, gaming equipments, digital cameras…

Learn more about our Need For Power – Motors on

OEM/ODM services

We produce haptic vibration motor and gear motor pack for customer electronic devices, provide a full services from designing to producing micro dc motors, also include battery packing and shipment.

NFP can make customized motors for the following parameters: motor dimensions, lead requirements, operating voltage, speed, current, eccentric wheel size

Need For Power Motor organization chart


Our quality

Before shipment to customers  all micro dc vibration motors, brushless dc motors or gear motors which made by Need-For-Power Motor Co., Ltd. will be done a complete and further test, such as dimension, performance, voltage, current, output power, torque, speed(rpm), weight, Amplitude, and so on.

Our certifications

ISO 9001-2008, CE, UL, RoHS, MSDS, UN38.3 and other SGS certifications

How can you contact us?

Tel: +86.15768470345
We will reply your requirements within 8 hours.

Where are we?

4-F205 Zhoushi Rd 108, Shiyan
Street Bao’an Shenzhen, China
China 518000

FAQ – Frequently Asked Questions

FAQ – 001: Vibration motors SMD Reflow type VS Spring Contact type
FAQ – 002: How to test coin vibration motor current
FAQ – 003: Summary of linear vibration motors LRAs
FAQ – 004: Considering using more than one vibration motor in a device
FAQ – 005: Vibration fundamental theory
FAQ – 006: The final solution for haptic feedback design
FAQ – 007: The differences between ERM and LRA vibration motors
FAQ – 008: Tactile actuator technologies
FAQ – 009: High definition haptics principles feel the difference

Could you send me a price list?

For all of our motors, they are customized based on different requirements like lifetime, noise, voltage, and shaft etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.

Is it possible for you to develop new motors if we provide the tooling cost?

Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we’ll make our evaluation to see if we can arrange or not.

How about Sample order?

A: Sample is available for you. please contact us for details. Once we charge you sample fee, please feel easy, it would be refund when you place formal order. You can order from directly.

Which shipping way is available?

DHL door to door, UPS, FedEx, TNT… are available. Q: Can you send me your price list?
A: Since we have hundreds of different products, and price varies per different specifications, we are not able to offer a price list. But we can quote within 8 hours once get your inquiries to make sure you can get the price in time.

Lead Times and Minimum Order Quantities

Customisations on motors will incur increased lead times and have varying MOQs, depending on the complexity. In general, small changes made to stocked motors, such as adding a simple connector to leads can be made very quickly (1~2 weeks). More complex customizations might require a change in the manufacturing process, such as increasing a gear-motor’s shaft length, or several iterations of samples to validate the performance, e.g. a target vibration amplitude. The best way to discover the possibilities, lead times and MOQs is to talk to our engineers by clicking here.

Can your motors be driven at something other than their nominal voltage?

Yes. DC motors (brush and brushless) have a very linear behavior: the speed of a motor is directly proportional to the voltage applied. For brush DC motors it is preferable not to run faster than the maximum recommended speed given in our datasheets. Therefore the voltage should be preferably close to the nominal voltage or lower. Since the motor life is affected by the speed of operation, operating the motor at lower voltages means less brush/commutator wear for all brush type motors. However if your application requires higher speed performance, overdriving the motor is possible. This will increase the speed at the expense of expected life. For DC brushless motors there is no brush commutation and the main contributor affecting lifetime is the ball bearings. However, our magnetic design optimizes the iron losses in the range of the nominal speed. Iron losses are proportional to the square of the speed. Overdriving the motor at a speed 1.5x higher than the nominal speed will increase the iron losses by a factor of 2.25x, which will drastically reduce the efficiency and overall motor performance. Stepper motors are often used with much higher voltage in chopper mode to achieve better dynamic performance.

How long do your motors and gearheads last?

Every application differs in life of a product: operating environment, input power, and duty cycle all affect the life. Even how the motor or gearmotor is connected to the load affects the Products total life performance. Other parameters to consider in estimating overall life are back-driving the gearmotor or running the motor or gearmotor into a hard stop. If your application requires the motor or gearmotor to have high axial or radial loads, ball bearings would increase expected life. If your design requires long life as one of the parameters, you may want to consider using one of our brushless motors. Brushless motors are generally only limited in life by the ball bearings which support the shaft. Our application engineers are available to discuss your questions concerning life of a product and make recommendations on the best product for the design criteria.

Can you run NFP-Motor brush DC motors and gear-motors on batteries

Yes, the NFP-Motor coil has been constructed so there is no moving iron in the rotor. We designate this type of motor construction as an Ironless coil. In this Ironless coil only the copper coil turns (around an immobile magnet system). This makes the rotor inertia extremely small and able to run at very low current levels. This type of design is most favorable for battery powered applications. In fact, our Athlonix motors have been uniquely designed to excel in performance for battery applications.

Can any of your motors and gearheads be combined?

We have the capability to assemble all of our motors with a gearhead to provide the performance you require. Our motor specification pages shows which gearheads are designed to be assembled with each motor. Our application engineers are available to discuss your questions concerning compatibility of a product and make recommendations on the best product for the design criteria.

Can NFP-Motor add cables and connectors to the motor?

Yes, we have the capabilities to add cables and connectors to any of our motor Products. For a quote on adding a special requirement, please call our application engineers for assistance with your design.

What factors affect motor noise?

Our motors are designed for quiet operation. This is achieved through our proprietary motor design techniques and material selection. There are many factors to consider, such as how the motor is mounted in the application and the load and speed at which the motor will operate. Another consideration is the type of bearings selected for the motor and/or gearmotor. Before making a final selection, the motor/gearmotor being considered should be thoroughly tested in the design for audible noise levels if this is a concern for the application.

Do you have speed-torque curves available for your motors?

Many speed-torque curves are available on the motor specification pages in our catalog. You can also submit an inquiry letting us know for which product you require a curve and our application engineering team will let you know if there is a speed/torque curve available.

There are shafts on both ends of the motor. Is it available with a single shaft?

In most cases, yes. You can select almost all of our motors (brush, brushless, and stepper) with either a single output shaft or a double shaft. Call one of our Sales Associates if you want specific information on pricing and product availability.

Is it possible to have a custom shaft on the motor, such as a flat or D-cut shaft?

Yes. You can specify where you want a flat on a shaft. You can also specify if you want a hole through the shaft, a pinion or pulley attached to the shaft, or a special sized shaft. Minimum order requirements may apply.

Can your motors be used as generators?

Yes, DC brush type motors can be used as generators. The disadvantage is they offer very low voltages. For assistance please contact our application engineers to discuss your application.

Are your motors/gearmotors capable of withstanding industrial application environments?

Our Products are used in a variety of industrial environments, such as factory automation, automotive hand tools, assembly plants, machining applications, semiconductor plants, HVAC, and robotics. We can also provide autoclavable motors/gearmotors for medical and dental applications. If your application requires a motor/gearmotor to be used in an extreme environment, please consult with our application engineers for the best suitable product for the application.

What’s the difference between a “servo” motor and a regular motor?

A servomotor uses an automatic device such as an encoder for error-sensing feedback to correct the performance (motion, velocity, position and/or torque). It is considered a closed loop feedback system where the repeatability and accuracy are an important application requirement. Open loop or “regular” motors are used when performance feedback data is not critical for the application. An encoder can be added to most motors to close the loop and provide performance feedback.

Are your brushless motors autoclavable?

We offer a full line of brushless DC slotted motors that are available with autoclavability. These motors are uniquely designed to meet the requirements of sterile and other demanding environments. Our autoclavable motors have been life tested to withstand in excess of 1,000 autoclave cycles. Many of our brushless motors are utilized in medical applications that require autoclaving.

Can I get feedback devices such as an encoder or other components?

Yes, each of our Products are designed to accommodate a variety of complimentary devices as follows: spur or planetary gearboxes, optical or magnetic encoders, power-on and power-off brakes.

What types of encoder do you have?

Optical, magnetic and magnetoresistive types.

What is a magnetoresistive encoder?

NFP-Motor’s high resolution MR encoders exploit the anisotropic magnetoresistance effect to provide analog signal that can be interpolated to generate lines. The number of lines per revolution can be set on our chip, up to 512.

When should I use a planetary gearhead or spur gearhead?

Spur gearheads are utilized when low current consumption, low noise, and high efficiency are a requirement. However they are limited when high torque must be transmitted. Planetary gearboxes typically exhibit higher current consumption, lower efficiency, and higher audible noise levels. But they are the best solution when high torques are required in an application with size limitations.

Are all of your gearheads reversible?

Yes, all planetary and spur gearheads are designed for bi-directional operation.